Temperature Controllers www.tempco.com | (800) 323-6859 | email: [email protected] 13-18 Model TEC-220 1/32 DIN Temperature Controller Design Features ✴ 1/32 DIN size – 24 mm × 48 mm ✴ Fuzzy Logic PID Autotune heat and cool control ✴ Short panel depth – only 3-7/8" (98 mm) required ✴ Universal input, field configurable (Type J T/C default, PT100, mA, V) with high accuracy 18-bit D-A ✴ Highly versatile – 6 types of inputs available ✴ Output 2 can be programmed as output or alarm ✴ NEMA 4X / IP65 gasketed front panel ✴ Universal input power, 90-250 VAC or 11-26 VAC/VDC ✴ Highly accurate universal input with 18 bit analog to digital converter ✴ Bumpless transfer to manual mode during sensor failure ✴ Wide variety of alarm mode selections ✴ RS-485 and RS-232 data communications interface optional ✴ Bright 0.40" (10 mm) LED display ✴ High performance at a very low price Power Input BOX 1 4 = 90-250 VAC 5 = 11-26 VAC / VDC 9 = Other Units — °F or °C BOX 6 1 = °F on faceplate 2 = °C on faceplate 3 = None (process units) Configurable for 3 Programmable Outputs! Signal Input — Universal, can be programmed BOX 2 in the field for item 5 or 6 5 = Thermocouple: *J, K, T, E, B, R, S, N, L 0-60mV 6 = RTD: *PT100 DIN, PT100 JIS 7 = 0-1 VDC 8 = *0-5, 1-5 VDC A = 0-10 VDC B = *4-20, 0-20 mA 9 = Other * indicates default value Output 1 BOX 3 1 = Relay: 2A / 240 VAC 2 = Pulse DC for SSR drive: 5 VDC (30 mA max) 3 = Isolated, 4-20 mA (default), 0-20 mA 4 = Isolated, VDC, 1-5 (default), 0-5, 0-1 5 = Isolated, VDC, 0-10 6 = Triac-SSR output 1A/240 VAC C = Pulse DC for SSR drive: 14 VDC (40 mA max) 9 = Other Output 2 / Alarm 1 BOX 4 0 = None 1 = Relay: 2A / 240 VAC 2 = Pulse DC for SSR drive: 5 VDC (30 mA max) 3 = Isolated, 4-20 mA (default), 0-20 mA 4 = Isolated VDC, 1-5 (default), 0-5, 0-1 5 = Isolated VDC, 0-10 6 = Triac-SSR output 1A / 240 VAC 8 = Isolated 20V @ 25 mA DC, Output Power Supply A = Isolated 12V @ 40 mA DC, Output Power Supply 9 = Isolated 5V @ 80 mA DC, Output Power Supply C = Pulse DC for SSR drive: 14 VDC (40 mA max) B = Other Communications BOX 5 0 = None 1 = RS-485 interface 2 = RS-232 interface 3 = Retransmission 4-20 mA (default), 0-20 mA 4 = Retransmission 1-5 VDC (default), 0-5 VDC 5 = Retransmission 0-10 VDC 9 = Other 1 2 6 3 4 5 Note: Detailed information on features common to digital microprocessor-based TEC temperature controls and the complete Table of Input Range and Accuracy can be found on page 13-46. A Part Number based on the hardware code and any software pre-programming will be issued at time of order. Hardware Code: TEC-220- Agency Approvals: File #: E244198
