Temperature Controllers www.tempco.com | (800) 323-6859 | email: [email protected] 13-33 Part Signal Number Input Out 1 Out 2 Out 3 TEC18001 TC relay none none TEC18002 TC relay relay none TEC18003 TC 4-20 mA none none TEC18004 TC 4-20 mA relay none TEC18005 TC 5VDC pulse none none TEC18006 TC 5VDC pulse relay none Part Signal Number Input Out 1 Out 2 Out 3 TEC58001 TC relay none relay TEC58002 TC relay relay none TEC58003 TC relay relay relay TEC58004 TC 4-20 mA none none TEC58005 TC 4-20 mA none relay TEC58006 TC 5VDC pulse none none TEC58007 TC 5VDC pulse none relay Power Input Standard: 90-250 VAC, 47-63 Hz, 12 VA, 5W maximum Optional: 11-26 VAC / VDC, 12 VA, 5W maximum Signal Input Resolution: 18 bits Sampling Rate: 5 samples / second Accuracy: ±.24% of span typical Maximum Rating: -2 VDC minimum, 12 VDC maximum (1 minute for mA input) Temperature Effect: ±1.5 μV / °C for all inputs except mA input ±3.0 μV / °C for mA input Sensor Lead Resistance Effect: T/C: 0.2μV/ohm 3-wire RTD: 2.6°C/ohm of resistance difference of two leads Burn-out Current: 200nA Common Mode Rejection Ratio (CMRR): 120 dB Normal Mode Rejection Ratio (NMRR): 55 dB Sensor Break Detection: Sensor open for TC, RTD and mV inputs; Sensor short for RTD input; Below 1 mA for 4-20 mA input; Below 0.25V for 1-5V input; Unavailable for other inputs Sensor Break Response Time: Within 4 seconds for TC, RTD and mV inputs; 0.1 second for 4-20 mA and 1-5 V inputs Recipe Number of recipes: 9 Number of Segments per recipe: Recipe 1, 2, 3, 4: 16 Recipe 5, 6, 7: 32 Recipe 8, 9: 64 Event Outputs: 3 Environmental and Physical Operating Temperature: 14 to 122°F (-10 to 50°C) Storage Temperature: -40 to 140°F (-40 to 60°C) Humidity: 0 to 90% RH, non-condensing Dielectric Strength: 2000 VAC, 50/60 Hz for 1 minute Dimensions: TEC-4500: 3-3/4 × 3-3/4 × 2-9/16" (96 × 96 × 65 mm) H×W×D Depth behind panel: 2" (53 mm) Panel Cutout: 3-5/8" × 3-5/8" (92 × 92 mm) H×W Weight: .55 lb. (250 grams) TEC-9500: 1-7/8 × 1-7/8 × 4-9/16" (48 × 48 × 116 mm) H×W×D Depth behind panel: 4-1/8" (104.8 mm) Panel Cutout: 1-25/32" × 1-25/32" (45 × 45 mm) H×W Weight: .33 lb. (150 grams) Approval Standards Safety: UL61010C-1 EN61010-1 (IEC1010-1) Protective Class: IP30 front panel, indoor use, IP65 front panel with option EMC: EN61326 TEC-4500 1/4 DIN Rear Terminal Connections TEC-9500 1/16 DIN Rear Terminal Connections Output 5 BOX 7 0 = None 3 = Retransmission 4-20mA / 0-20 mA 4 = Retransmission 1-5V / 0-5V/0-10V 7 = Isolated 20V @ 25 mA DC, Output Power Supply 8 = Isolated 12V @ 40 mA DC, Output Power Supply A = Isolated 5V @ 80 mA DC, Output Power Supply D = Isolated RS-485 interface E = Isolated RS-232 interface Case Options BOX 8 0 = Panel mount standard 1 = Panel mount with NEMA 4X/IP65 front panel 2 = DIN rail mount adapter (TEC-9500 only) Use copper conductors, except on T/C input. TEC-9500 Stock and Common Part Numbers (Power Input: 90-250 VAC) TEC-4500 Stock and Common Part Numbers (Power Input: 90-250 VAC)
